Harley Davidson Parts, 1936-1948

Above photo taken from a 1978 HD Factory Tool Manual.The 96650-30 was used from 1930 to the end of dealers truing flywheels.All V-Twin HD models and Indians.

Harley-Davidson Flywheel Truing Stand, 65-30A, 96650-30A, original - $1200Raised casting number: 65-30A H-D. Later part number is 96650-30A. CrankShaft Truing Stand is all there and works with HD's and 80" and other Indians. Jim Mosher, 14 records at Bonneville with his twin engined 1940 Scout, used this truing stand when he started out building Indian Chief and Scout powerplants. All of my motors. Stand weighs 60 pounds. Approximate $150 to $200 USPS shipping in lower 48.

Harley-Davidson, Sterling Siren 38R Assembly for Big Twins, complete. $800, ORIGINAL 1941 through the early 1950's. All parts are original except for the 2 bracket to frame caps. These faithfully reproduced brackets are bronze. Red Boiler Plate is attached to back of siren noise maker. Serial number 27032. All parts work well together. No damage. Ready to use. 2 new, sealed, shaft bearings in the siren body. Cosmetically not restored.

BUFFY SEAT HANDLE SET, original, 1933-1952 - $50 for the set Good condition, not bent.

FENDER RAIL STUDS SET of 4 - $80 For 3/8" rails, not included. A rare style of Studs. Chrome is not great. Good for a rider or an original bike.

$100. Muffler/Tail Pipe. UL, 1937-1940, EL, 1937-1940. Lightly used in very good condition. I replaced this with the more expensive and accurate Carl's Cycle Supply, version.

FORK STABILIZER CASTING, Bronze, 11525-30BS - $50, one only This is a leftover, unfinished casting from when I made these as finished parts. This one was misplaced and missed the final production run. 1930-1957 Springers. Drill 2 holes and polish.

IN STOCK, PHOTOS COMING HARLEY-DAVIDSON, Red Bakelite Dice Shift Knob, 1.5" nominal, 1.470" actual, w/brass insert, 3/8 x 24 - $70 H-D shifter shown to demonstrate relative size of 1.5" knob to shifter.Bakelite Knob shows great patina.Bakelite dice were primarily manufactured in the USA during the 1930s to the late 1940s, a period often referred to as the "Age of Plastics" or the Art Deco era. AI description.Genuine Bakelite can be tested using the Semichrome method. Apply the pink Semichrome paste to a cue-tip and gently rub on the suspected Bakelite. The cue-tip will turn yellow indicating a positive result. See photo.

HARLEY-DAVIDSON, White Bakelite Dice Shift Knob, 1.250", w/brass insert, 3/8 x 24 - $60H-D shifter shown to demonstrate relative size of 1 1/4" knob to shifter.Bakelite Knob shows great patina.Bakelite dice were primarily manufactured in the USA during the 1930s to the late 1940s, a period often referred to as the "Age of Plastics" or the Art Deco era. AI description.Genuine Bakelite can be tested using the Semichrome method. Apply the pink Semichrome paste to a cue-tip and gently rub on the suspected Bakelite. The cue-tip will turn yellow indicating a positive result. See photo.

1107-33 - INLET PIPE (intake manifold), original - $100 per set, one onlyIntake Manifold with new brass seals.Original part. VLD Twins, 1933-1936. UL & ULH Big Twins 1937-1938.

COLONY BRASS INTAKE MANIFOLD SEALS - $10 per set1930-1948 Big Flatheads, 1936-1939 EL.

1238-36 - DL54, THROTTLE SHAFT LEVER - $55, nickel platedHarley-Davidson, 3 bolt Linkert, 1936 to 1939, 61" OHV Twins. Total height: 0.930".

1238-37 - THROTTLE SHAFT LEVER - $50, cadmium platedShown is an original part. Harley-Davidson, Linkert, 1937 to 1948, 74" & 80" Flathead Twins. 1935 to 1948, 45" Flathead Twins. Total height: 1.543".

1238-40 - THROTTLE SHAFT LEVER - $50, cadmium platedHarley-Davidson, 4 bolt Linkert, 1940 to 1947, 61" & 74" OHV Twins. Total height: 0.760".

1238-48 - THROTTLE SHAFT LEVER - $50, cadmium plated.Harley-Davidson, 4 bolt Linkert, 1948, 61" & 74" OHV Panhead Twins. Total height: 0.830".

3103-29 - UPPER SEAT BAR PLATE (6 hole shown, or 4 hole)- $183103-29S - LOWER SEAT BAR PLATE- $10Spring steel plates for the rear cross bar, 0.125" thick. Black color results from the heat treating process. Easily removed by blasting. 1929-1964, Big Twins & 45".

3110-37 - SEAT BAR BUSHING SET - $16, I made more of these than I need.USA made hardened, ground, Steel Double Bushings. IMPROVED FIT for OEM and reproduction Seat Bars. Colony retail is $30.Big Twins, late 1937-1964. 45" solo and Servicars, 1938-1973.

HARLEY DAVIDSON SWEATER - $50Extra Large, heavy cotton pull-over sweater. Harley logo label. Barely used. Classic design. From the early 1990's.

11525-30HD - FORK STABILIZER - $90, I may have only cosmetic seconds for $50 each.Reproduction of factory part shown in 1929 accessory catalog. Singles, 1929-57 45", 1930-48 Big TwinsThese will not work when a Ride Control is installed on VL forks.Chromed bronze. On the back: M.LAKE CO. Pat'd MAR 1928 BROOKLYN, NY

161035 - SAINT CHRISTOPHER MEDAL for MOTORCYCLIST'S,1" diameter, nickel clip, sterling silver - $40My handlebar mounted, solid sterling silver, Saint Christopher medal helps keep me safe. These medals were first introduced in the 1949 Atlas Motorcycle Accessories Catalog.

AIRHORN LINKERT - NICKEL PLATED STEEL - $65Open backed, 2 3/4" X 4". All letters in relief. Offered by Linkert in 1930's & 1940's.